Shantu logo

Language

  • English
  • العربية
  • français
  • Deutsch
  • Indonesia
  • italiano
  • 한국의
  • português
  • русский
  • español
  • Türkiye

Flush diaphragm pressure sensor for water and beer
2016-09-09

Dear Sendo Sensor, We have been in contact before about flush diaphragm pressure sensors, but could not find a suitable product then. The price was too high for me. I have now changed my measurement electronics and was wondering if you could offer me a better price for just the pressure transducer, without integrated electronics. I can then connect it to my own ADC.I am looking at the SS112 and SS115.I want to use them to measure water and beer volume up to a water height of 2 meters. I can measure the output voltage with nanovolt accuracy, but the sensors need to be low drift.The working temperature is 0 to 100C. Environment temperature 0 to 50 degrees.

Solutions: SS115 series flush pressure transducer

Features
● Typically G1/2” connection
● High accuracy and reliability
● Stainless steel 316L wetted parts
● 1.0mA, 1.5mA constant current supply
● 5VDC, 10VDC constant voltage supply
● 0-70°C temperature compensation range
● Isolated construction, able to test various media
● Absolute, vented gauge and sealed gauge pressure

Descriptions

SS115 series flush diaphragm pressure transducers are covered the pressure from -1bar to 400bar, typical working temperature from -20 to 100°C.

SS115 series are designed by the piezoresistive technology, work following the principle of piezoresistive effect, the silicon chip is protected by 316L stainless steel housing and silicone oil filled in the isolated housing, meet “clean in place” (CIP) and “sterilize in place” (SIP) maintenance procedures demand.

Typically for using in food, process and industrial applications where the media is either viscous, or is otherwise liable to block the port of a conventional pressure transducer with a recessed diaphragm or pressure port.

flush mount pressure transducer flush mounted pressure transducer